Announcement

Collapse
No announcement yet.

Which Adapter do I use in MEADPT kit to connect up to ZIFF?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Which Adapter do I use in MEADPT kit to connect up to ZIFF?

    Hi, I have a U2 Programmer and ZIFF Adapter for programming. I recently got a MPLAB ICD3 and MEADPT Kit. Which adapter in the MEADPT kit do I use to program Pics on the ZIFF? There is the adapter with 10k resistor on it and the adapter with the jumper. Which one is it?

    Thanks in advance

    (Piranha)

  • #2
    There are photos of all the adapters in individual use on the product page:

    http://store.melabs.com/prod/adapters/MEADPT.html

    Find the photo of the ICD3-to-ZIF arrangement. I think you can identify the adapter from the photo.
    Charles Leo
    ME Labs, Inc.
    http://melabs.com

    Comment


    • #3
      I tried that one 1st. It did not work because I needed to set the 'Set Project Configuration Bits' within Power Option Categories for ICD3.... Then I tried the other adapter before I realized that....
      I figured it out though thanks.

      Comment

      Working...
      X