Announcement

Collapse
No announcement yet.

USB U2 Not programming ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • USB U2 Not programming ?

    USB U2 Not programming ?

    Any body knows please Help:
    PS: My first languish is German
    typing on a German keyboard

    I have installed :

    PBP #3 Gold
    Micro Code Studio Plus V 5.0.0.5
    Compiler V PBPX 3.0.6.4
    MPLAB IDE V 8.85

    Programmer : USB U2 melabs 4.5. Firmware 5.9
    Chip Target info ID 09A4 (16F877)

    My problem started when I tried to program PIC16F88.

    So I went back to BASICs:
    I use the USB U2 melabs with a LAB-X2 from meLAB
    Chip is 16F877-20/P .
    Yes power is supplied to the LAB-X2
    My programmer gets power from a powered USB Port

    My program is blink3x2 from meLAB sample library for the LAB-X2

    When I go [program compile inMicro Code Studio] it appears every thing is fine however
    the red programming LED on the U2 Programmer is not flashing !
    And I don’t get the desired results on the LAB-X2

    When I program from the meLAB Programmer it appears to program just
    fine [the red led is flashing].unfortunate I don’t get the desired results on the LAB-X2.
    Except now the hex code is changed !
Working...
X