Announcement

Collapse
No announcement yet.

PBP3.08 - support for 16f1947 port F and G ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Darrel Taylor
    replied
    Well, to try to put it in perspective...

    Because of what Microchip did with those two parts ...
    Every PBP command that uses a PIN, whether input or output has to be modified.
    There are over 5000 macro's that make up PBP's commands.
    Not all of them need to be modified, but you have to look at them all to see which ones need it, and which ones don't.

    This will result in new library files for only these two out of 546 PIC chips.

    ... It may take some time.

    Leave a comment:


  • longpole001
    started a topic PBP3.08 - support for 16f1947 port F and G ?

    PBP3.08 - support for 16f1947 port F and G ?

    Hi Darrel , is there there any expected date for when the next release of PBP3 that will support the 16f1947 port f & g ports ?

    cheers

    Sheldon
Working...
X